SURE-STEP slip-resistant additive is a finely ground polymer material for addition to concrete sealers for slip resistance. This additive can be added to most film-forming water- and solvent-based sealers, including the CS-309™, SEAL CURE™ and VOCOMP® Series, as well as TIAH® and the DECRA-SEAL™ series from W. R. MEADOWS. Please consult sealer manufacturer prior to using, if using a product not listed above.

SURE-STEP provides improved chemical and abrasion resistance, and is more comfortable to bare feet on treated surfaces than sand or aggregate additives. The product's low density and insolubility characteristics will help reduce settling and provide optimum performance in its various applications, without changing the viscosity. Due to its low density, SURE-STEP stays suspended in thin materials.

Surface Preparation…Follow surface preparation directions of sealer being applied.
Application Method…SURE-STEP is designed to be incorporated into a suitable concrete sealer. Minimum addition ratios are 3.2 oz. per one-gallon can and 16 oz. per five-gallon pail. Additional SURE-STEP can be added, depending on the desired texturing effect. Do not exceed 8 oz. per gallon.
Stir, while adding SURE-STEP to the container of sealer. The product may float at first, but once it has wet out, it will mix in easily. In thinner products, occasional stirring during application may be required to keep the particles well suspended within the coating. It is recommended that when mixing SURE-STEP into unfamiliar sealers, that a small test batch is mixed, followed by a small test application.
Drying Time…Follow directions of sealer being applied.
Clean up…Follow directions of sealer being applied.