DESCRIPTION
MEL-ROL LM is a single-component, polymer-modified, cold-applied, water-based, liquid waterproofing membrane ideal for below-grade vertical seamless waterproofing applications. We have taken the same high quality rubber polymers found in MEADOWS’ successful MEL-ROL “peel and stick” membrane, and converted them into a heavy-bodied, high solids, quick drying liquid membrane.
With MEL-ROL LM, installation time is reduced, utilizing either a spray or roller application. A variety of different protection courses, insulation boards or drainage boards can be imbedded into the membrane to create a superior waterproofing system. With the application of PERMINATOR® vapor barrier over the membrane, a composite system can be created that has the combined advantages of both “peel and stick” and liquid-applied membranes.

USES
MEL-ROL LM can be used on new and remedial waterproofing applications on concrete or masonry block substrates. Since the formula is water-based, MEL-ROL LM can also be used on both ICFs and “green concrete” applications.

FEATURES/BENEFITS
* Waterproof – very low vapor permeability (perm rating).
* Superior elongation – bridges minor cracks; will not become brittle with age.
* Fully bonded – water will not run beneath the membrane.
* High solids, single-component, fast drying formulation – easy to apply; low cost application equipment; eliminates two-component mixing problems.
* Cold-applied/water-based – will not adversely affect insulated forms (ICFs) or various protection board options. Allows for application to damp or “green concrete.”
* VOC content is 0.0 g/L. Produces no noxious odors.
* Easy application – no heating necessary. Eliminates fire hazards associated with heating kettles. Apply with roller or airless sprayer.

PACKAGING
5 Gallon (18.93 Liter) Pails
55 Gallon (208.20 Liter) Drums*
*special order only

LEED INFORMATION
May help contribute to LEED credits:
* EA Credit 1: Optimize Energy Performance
* EQ Credit 3.1: Construction IAQ Management Plan: During Construction
* EQ Credit 4.2: Low-Emitting Materials: Paints & Coatings
* MR Credit 5.1: Regional Materials: 10% Extracted, Processed & Manufactured Regionally
* MR Credit 5.2: Regional Materials: 20% Extracted, Processed & Manufactured Regionally