Single-Component, Water-Base, Polymer-Modified, Cold-Applied, Residential Waterproofing Membrane

DESCRIPTION
MEADOW-PRUF SEAMLESS is a single component, polymer-modified, cold-applied, liquid waterproofing membrane ideal for residential below grade vertical waterproofing applications. This heavy-bodied, liquid membrane is ideal for immediate application to newly stripped, below grade concrete walls and for use with insulated concrete forms (ICF's). (Also suitable for below grade masonry block walls.)

USES
MEADOW-PRUF SEAMLESS is designed specifically for vertical residental waterproofing applications. This highly flexible and versatile product provides outstanding water/vapor protection, especially in applications with a high level of offsets, penetrations, etc. MEADOW-PRUF SEAMLESS is ideal for use with all types of insulated residential concrete forms.

FEATURES AND BENEFITS
* Environmentally safe, no odor.
* Water-base / Won't adversely effect insulated forms and allows immediate application to "green concrete" walls.
* Cold-applied, one part / Easy to install. Apply with roller or airless sprayer (contact W. R. MEADOWS for spray equipment specifications).
* Excellent elongation characteristics / Bridges cracks.
* Superior bond strength / Ensures long life waterproofing protection
* Cleans up with water.

PACKAGING
5 gallon pails (18.93 L)
55 gallon drums (208.20 L)*
*Available by special order

SHELF LIFE
6 months in unopened container. Do not store in temperatures over 90ºF or below 32ºF.

SURFACE PREPARATION
All surfaces must be clean (free of coatings), free of frost, relatively smooth and structurally sound. Patch any bug holes, tie holes, large gaps or cracks with MEADOW-PATCH 5 or MEADOW-PATCH 20 from W. R. MEADOWS. All loose laitance on the substrates, such as dirt, dust, loose stones and debris should be either swept or blown clean.

MIXING
MEADOW-PRUF SEAMLESS is designed to be used from the pail or drum with little or no mixing. However, if water appears on the surface of the unit, thoroughly mix with a low speed mechanical mixer prior to application.

PRIMING
To reduce blistering on concrete surfaces, a thin coat of MEADOW-PRUF SEAMLESS diluted with water may be required. (Approximate dilution ratio of MEADOW-PRUF SEAMLESS to water is 4:1.)
Thoroughly, mechanically mix primer. Prime the entire concrete surface to be waterproofed by spraying or rolling on a single coat at a coverage rate of 100-150 sq. ft./gal. Allow primer to dry (approximately one hour, depending on climatic conditions).

APPLICATION
MEADOW-PRUF SEAMLESS may be applied by spraying* or 3/4" minimum nap roller.
Thoroughly, mechanically mix MEADOW-PRUF SEAMLESS prior to application. MEADOW-PRUF SEAMLESS may be sprayed on at the minimum coverage rate of approximately 20-25 sq.ft./gal. (60 mils, wet) (45 mils, dry). Two coats (30 mils wet) may be necessary if the material begins to slump. Apply second coat after first coat has completely dried, approximately one to two hours after first coat. Frequently inspect surface area with a wet mil gauge to ensure consistent thickness. Porous masonry block walls may require additional coats to obtain desired thickness.
For detailed information on spray equipment recommendations, use and clean up, please refer to W. R. MEADOWS technical bulletin #05-724-A, or the softbound catalog.

PROTECTION
Cover with W. R. MEADOWS Protection Course, MEL-DRAIN Drainage Board, or other approved material.

CLEAN-UP
MEADOW-PRUF SEAMLESS cleans up easily while wet with water. After material has cured, use mineral spirits for removal.

PRECAUTIONS
KEEP FROM FREEZING. Do not apply MEADOW-PRUF PRIMER or MEADOW-PRUF SEAMLESS if rainfall is forecast or imminent within four hours. Do not apply MEADOW-PRUF PRIMER or MEADOW-PRUF SEAMLESS when air, material and surface temperatures are expected to fall below 40ºF (4ºC) within 4 hours of completed application.