DESCRIPTION
FORM SEAL is an economical curing and sealing compound formulated from
acrylic polymers and quick-evaporating solvents. When applied on freshly placed
concrete it forms a clear, uniform moisture retentive film, which simultaneously
cures and seals the concrete.
 

APPLICATION INSTRUCTIONS
Product container provides all application information. Read and follow all
instructions and precautions.
Apply by sprayer, long nap roller, soft bristle broom or lamb's wool applicator.
Standard garden-type sprayers equipped with a neoprene hose and gaskets are
recommended for best results.
Apply FORM SEAL as soon as all surface water has disappeared and the
concrete surface will not be marred by walking workmen. Apply evenly over
entire surface; avoid puddling in low areas. Restrict foot traffic for at least 4 hours
preferably, 12 hours.
Should not be applied during high temperature conditions in direct sunlight.
These conditions cause rapid evaporation, which does not allow the film to form
properly. Under these conditions, the film may peel, bubble, and/or turn white
(blush).
Should not be applied to concrete exposed to excessive moisture. Entrapped
moisture in a solvent based sealer may cause the film to peel and/or turn white
(blush).
For greater protection and higher sheen, apply a further coating of FORM SEAL
and/or apply a coating of FORM SEAL/25.

CLEAN UP
Clean tools and equipment after use with a solvent such as SEALTIGHT Solvent,
Xylene or Toluol.

SAFETY AND TOXICITY
Contains solvent. Use with adequate ventilation and avoid prolonged breathing of
vapours that may cause dizziness or suffocation. Avoid contact with skin and/or
eyes. See product label and Material Safety Data Sheet for additional
information. Read and follow all instructions and precautions.
Harmful or fatal if swallowed.
Proper application is the responsibility of the user. Field visits by Form & Build
Supply personnel are for the purpose of making technical recommendations only,
and are not to supervise or provide quality control on the job-site.

SPECIFICATION CLAUSE
Section 03 05 00.
Concrete Curing and Sealing Compound Form & Build Supply FORM SEAL
conforming to ASTM C 309, Type 1, Class B.