DUOGARD Form Release Agent is a ready-to-use mixture of organic chemicals, which react with the concrete alkali to prevent bonding of the concrete to the form and a chemically inert, high-molecular weight non-reactive ingredient, which also facilitates form removal.

This combination provides both chemical and physical (DUO) separation for highly effective form release.

Surface Preparation
Form surface should be clean and free of hardened concrete and other deleterious materials. Remove rust, scale or previously used form oil from steel forms in accordance with good concrete practice, especially for architectural or exposed concrete surfaces.

Application

• Apply by low pressure sprayer equipped with an 80° fan pattern spray tip, at a rate of 0.4 litres (0.08 gal/13 oz.) per minute in a light even coat. When employing a brush or roller take care to apply as thinly and evenly as possible. More is not better, a thin coating provides superior results.
• New wood forms (not pre-coated) should receive at least two coats before being used.
• All forms should be re-coated before each subsequent use.
• Proper application is the responsibility of the user. Field visits by W. R. MEADOWS’ personnel are for the purpose of making technical recommendations only, and are not to supervise or provide quality control on the job-site.